2008 Cemco Mobile Central Mix Plant
2008 Cemco model 240 Central Mix
100HP Diesel Engine
110 gallon Hydraulic tank
(2) 13 cubic yard rock bins
10 cubic yard sand bin
265 sq ft pulse jet dust collector
1273 cu ft cement storage
660 gallon water surge bin
400 gallon water weigh bin
100 cu ft cement weigh bin
(10) support screw jacks
(4) Hydraulic leveling jacks
Cement weigh bin pulse jet dust collector (25 sq ft)
36" transfer conveyor at 400 FPM/800 TPH, with belt scraper
5-bank leveling and erection valve
2000 Watt Inverter - 120VAC
2" 160 GPM Hydraulic Power Water Pump
23 CFM Air Compressor
60-gallon Diesel Fuel Tank
6" Water Fill Valve
6" Water Discharge Valve
12" Cement Fill Valve
10" Cement Discharge Valve
Normal 10 yard discharge time 1.5 - 2 minutes
75-ton Auxiliary Silo, mobile & self-erecting
10-Yard mixer drum model 240
Newest Command Alkon batching control system
Four (4) 15-ton feed bins with 30" feed conveyors,
one bin sits on load cells and can be used as a fourth
The Cemco batch plant, available with 3 aggregate bins, is totally self-contained. It needs no outside power source.
The Cemco is self-erecting; eliminating the need for cranes, a substantial savings in set-up costs. Speed and ease of set-up and tear-down are a plus.
The entire plant is compact and has a small footprint when set-up. The plant pulls in one unit (separate loads for auxiliary equipment) and is sold as a complete, operating batch plant. Everything needed to set up and batch concrete is standard equipment on every Cemco.
Capable of producing up to 240 cubic yards per hour and towed as one complete unit. Two men can easily set the plant up and be ready to pour concrete in a matter of hours.
By placing the plant closer to the job site fewer transit mix trucks are used, saving fuel, labor and equipment costs.
Fully balanced John Deere® diesel engine powers a hydraulic power plant which operates all batch plant and auxiliary equipment functions.
All valve controls are 12V DC.
A dust collector on the cement weigh bin and on the cement storage silo are standard equipment.
High-level indicator and silo vent are standard equipment.
50 CFM air compressor and 2″ water pump are standard equipment.
The plant is leveled by four hydraulic jacks. Three turnbuckles tie down the bins and fold-away batch house. Hydraulic rams raise the cement storage silo into its vertical position. Two pins hold the tower in place. All wiring is permanently in place. Only the water discharge hose and cement discharge hose need to be connected.